Compact constant temperature controller ACD10
Compact constant temperature controller ACD10
Compact constant temperature controller ACD10
Compact constant temperature controller ACD10
Compact constant temperature controller ACD10
Compact constant temperature controller ACD10

Compact constant temperature controller ACD10

€215,00
/
Tax included.

Controller ACD10 is prewired with temperature sensor and is intended for control of mixing valve. It features simple user interface with setup of controller in only few steps.

  • Boiler return-pipe temperature or any other energy source temperature control.
  • Heating or cooling system supply temperature control.

Features

  • 2 pre-set hydraulic schemes.
  • Prewired with temperature sensor.
  • Single sensor option.
  • Adjustable temperature control.
  • Simple user interface.
  • Direct installation onto 20 different mixing valves.
  • The possibility to configure the mixing valve opening direction.
  • Innovative connector system for connecting sensors.

Clutch for manual operation

The manual mode clutch of the AHD compact controller is activated by pressing the button. When the clutch is activated, the mixing valve control and, where appropriate, also the circulation pump is switched off to save energy. Manual operation mode is signalled on the display.


Quick installation

Innovative accessories and installation system provides a quick installation and removal of the ACD compact controller from/to the mixing valve, mostly without any tools. There are accessories for most mixing valves available on the market.

Setup buttons

The buttons for setting the controller are located under the manual turning knob. That prevents unwanted access to the controller setup.

Plug-in connectors

The ACD compact controller has a built-in connector for plug-in connection of the power cord. That provides a simple cable replacement in case of damage.

Acd Graphic display

Color graphic display with resolution of 240 x 240 dots provides detailed display of graphics and texts.


Technical data

TFT display
Keypad
Own consumption Maximum 3.5 W
Standby power consumption Maximum 0.5 W
Torque 5 Nm
Rotation angle 90 < °
Rotation speed 2 min 90 < °
Mixing valve control 3-point PID
Connection voltage 230 V ~, 50 Hz
Maximum own consumption 5 W
Power supply of built-in clock Battery CR1025 (Li-Mn) 3 V
Accuracy of built-in clock +/-1 s (24 h) at 20 °C
Degree of protection IP42 according to EN 60529
Safety class I according to EN 60730-1
Type of temperature sensors Pt1000
Housing material PC - dark grey
Operating temperature 0÷50 °C
Storage temperature -20÷65 °C
Product weight 900 g

Recently viewed